New Project
Re: New Project
Phew - seats finished! The rear seat base is a different colour as I had to buy another hide, but I'm OK with that: the overall look is fine and the interior smells wonderful!
- Peter McKercher
- Posts: 1074
- Joined: Sun Nov 27, 2005 4:26 am
- First Name: Peter
- Location: Ontario, Canada
- Contact:
Re: New Project
What an elegant automobile.
Peter McKercher
Vice President - NASOC
Pre war Singer Specialist and Collector
Automotive Historian
Author of "Racing Roadsters"
Vice President - NASOC
Pre war Singer Specialist and Collector
Automotive Historian
Author of "Racing Roadsters"
- jeans_old_man
- Posts: 413
- Joined: Wed Apr 12, 2017 10:47 pm
- First Name: Brian
- Location: Cheshire
Re: New Project
Superb! In its day this car could compete with the likes of lagonda that cost ten times as much.
Re: New Project
So I'm now thinking about the last major item which is the windscreen. My friend Dick, who has too many of his own projects, has failed to produce one, and after 2 years of waiting I have taken the parts back and I'll have a go myself. I have four main options and I would welcome feedback on these:
Option 1 - revert to the way she came with wooden fillers reducing the size of the opening to fit a screen that is too small but functions as an opening screen. The original fix was very crude comprising bits of softwood nailed into the opening. I would do a better job and would cover hardwood fillers with aluminium painted to match the rest of the car. I attach a picture of the original to show the reduction in size required.
Option 2 - Fit a piece of laminated glass into the opening and seal it in place like a window. This would be quick and dirty but would keep the correct opening size.
Option 3 - Cut down the middle of the top and bottom pieces and make fillers out of brass to extend them to the right size. This could be very strong as I would use a brass rod soldered into the top hollow section to support the filler piece, and the glass would generally hold it all together. This would need refinishing but the chrome on the original is not very good and I would get the parts re-chromed. The drawback to this option is that once I have cut the parts up I can't revert to option 1 if it doesn't go well.
Option 4 is to try and make a whole new part, but useful sections in brass don't seem to exist and I would have to make them up out of channel, tube and plate soldered together. Trying this option would leave all the other options available if I fail.
Option 1 - revert to the way she came with wooden fillers reducing the size of the opening to fit a screen that is too small but functions as an opening screen. The original fix was very crude comprising bits of softwood nailed into the opening. I would do a better job and would cover hardwood fillers with aluminium painted to match the rest of the car. I attach a picture of the original to show the reduction in size required.
Option 2 - Fit a piece of laminated glass into the opening and seal it in place like a window. This would be quick and dirty but would keep the correct opening size.
Option 3 - Cut down the middle of the top and bottom pieces and make fillers out of brass to extend them to the right size. This could be very strong as I would use a brass rod soldered into the top hollow section to support the filler piece, and the glass would generally hold it all together. This would need refinishing but the chrome on the original is not very good and I would get the parts re-chromed. The drawback to this option is that once I have cut the parts up I can't revert to option 1 if it doesn't go well.
Option 4 is to try and make a whole new part, but useful sections in brass don't seem to exist and I would have to make them up out of channel, tube and plate soldered together. Trying this option would leave all the other options available if I fail.